Travamzi
lets get you connected

Help centre

1. How to install a Travanzi eSIM (QR code)

Your phone must be eSIM-capable and carrier-unlocked. Check the live list: https://travanzi.com/esim-compatible-devices/

Buy a country, regional, or global plan on https://travanzi.com/. Guest checkout is supported. After payment we email the QR code and install details. Logged-in users can also open My eSIMs: https://travanzi.com/my-esims/

Install on the device you will travel with. Use Wi-Fi for the first install. Installing early does not usually start the plan clock. Validity typically starts when the eSIM first connects to a supported network at your destination.

 

iPhone

1. Open Settings -> Cellular (it may be called Mobile or Mobile Service).

2. Tap Add eSIM -> Use QR Code, then scan the QR from your email or My eSIMs. You can also press and hold the QR image and choose Add eSIM.

3. Follow the prompts. Keep the phone on this screen until it finishes (it can take a few minutes).

4. Turn On This Line for the Travanzi eSIM. Set Cellular / Mobile Data to the Travanzi eSIM. Turn Data Roaming ON for the Travanzi eSIM only.

5. Leave Default Voice Line on Primary (your home number) unless you bought a Discover+ plan and want to use those minutes.

 

Android (Pixel / Samsung and similar)

1. Open Settings -> Network & internet (Samsung: Connections) -> SIMs / SIM manager.

2. Tap Add eSIM / Add mobile plan and scan the QR code.

3. Turn the Travanzi eSIM on. Set it as the line for Mobile data. Turn Data roaming ON.

4. Turn Data roaming OFF on your home SIM, or turn the home SIM off for data, so you are not billed by your home carrier.

 

After install

You may see 4G / 5G only after you arrive in a covered country. If you installed at home, the eSIM can sit ready until you reach the destination.

Need more data later? Buy another plan and install the new QR code. This store does not add data onto the same eSIM after purchase.

 

If QR install fails, use article 2 (manual SM-DP+ code).

2. How to install with a Manual Activation Code

Use this if the camera cannot read the QR code, or if a Google Pixel shows Operation Code 9 / Error 10014.

 

Where to find the codes

Open the order email, or log in and go to My eSIMs: https://travanzi.com/my-esims/

Copy the SM-DP+ Address and the Activation Code. Some plans also include a Confirmation Code – enter it only if it is shown. Leave Confirmation blank if it is not provided.

 

iPhone

1. Settings -> Cellular / Mobile Service -> Add eSIM.

2. Tap Use QR Code, then Enter Details Manually at the bottom.

3. Paste SM-DP+ Address and Activation Code. Add Confirmation Code only if you have one.

4. Tap Next and wait. Do not leave the screen until it finishes.

5. Turn On This Line, set Mobile Data to the Travanzi eSIM, and turn Data Roaming ON for that line.

 

Android (Pixel / Android 13 and later)

1. Settings -> Network & internet -> SIMs -> Add eSIM / Download a SIM.

2. Choose Enter it manually (sometimes under Need help? or Having trouble scanning?).

3. Paste the SM-DP+ Address and Activation Code from My eSIMs or the email.

4. Turn the eSIM on, set it for Mobile data, and enable Data roaming.

 

Samsung Galaxy

1. Settings -> Connections -> SIM manager -> Add eSIM.

2. Scan QR, or use the option to enter the activation code manually.

3. Set the Travanzi eSIM for Mobile data and turn Data roaming ON.

If you cannot see Add eSIM at all, the phone is not eSIM-capable or it is carrier-locked. See article 8 and the device list: https://travanzi.com/esim-compatible-devices/

 

If you see Unable to activate or This code is no longer valid, the profile may already be on the phone. Do not keep scanning the same QR. Follow article 7.

3. When does my eSIM start and how do I connect?

Buying and installing does not usually start the clock. For Airalo-powered Travanzi plans, validity typically starts when the eSIM first connects to any supported mobile network in the plan’s coverage area.

Install on Wi-Fi before you fly. Keep the Travanzi line off, or leave data on your home SIM, until you arrive. Then switch Mobile Data to Travanzi and turn Data Roaming ON.

If a specific plan uses a different rule, it is shown on that product. After the clock starts, the plan runs until the data is used up or the validity days end – whichever comes first.

How to connect at the destination

Turn off Airplane Mode.

Turn On This Line for the Travanzi eSIM.

  1. Set Cellular / Mobile Data to the Travanzi eSIM.
  2. Data Roaming ON for Travanzi. Data Roaming OFF on your home SIM.
  3. If the install details list an APN, open Cellular Data Network / Access Point Names and enter it exactly as shown. Leave other APN fields blank unless the details say otherwise. Many Airalo plans set APN automatically – do not guess and do not use a generic APN such as globaldata.
  4. Wait up to 15 minutes for 4G / 5G. A local or regional plan only works in the countries listed on that plan. Open IN X COUNTRIES on the product before you travel.
 

Discover vs Discover+

Most Travanzi plans are data only. WhatsApp, FaceTime, and similar apps work over data.

Discover+ plans also include SMS and calling minutes when the plan card shows them (for example 100 SMS / 100 Mins). Set that eSIM as the line for calls/SMS only if you intend to use those extras.

4. eSIM Connection Troubleshooting Guide

Do not delete the eSIM from the phone. A deleted profile cannot always be put back, and unused data is not refunded.

Typical symptoms: no internet even though the eSIM shows a signal; only E (Edge); very slow speeds; Searching.

Confirm you are in coverage

A country eSIM works in that country only. A regional or global plan works only in the countries listed on that plan. If you installed at home, wait until you arrive.

Turn the Travanzi line on and use it for data

iPhone: Settings -> Cellular -> Turn On This Line on the Travanzi eSIM. Tap Cellular Data and select Travanzi. Data Roaming ON for Travanzi, OFF for Primary.

Samsung: Settings -> Connections -> SIM manager. Set Mobile data to the Travanzi eSIM. Mobile Networks -> Data roaming ON.

Pixel: Settings -> Network & internet -> SIMs -> Travanzi eSIM. Mobile data ON, Data roaming ON.

APN

Open the install details in your email or My eSIMs. If an APN is listed, enter it exactly. If it says the APN is automatic, do not change it. Do not use the old Maya value globaldata.

Reset the radio

Turn Airplane Mode on for 30 seconds, then off. Wait up to 15 minutes.

Pick a network manually

iPhone: Settings -> Cellular -> the Travanzi plan -> Network Selection -> turn Automatic off -> choose a network from the plan details, then try Automatic again after it connects.

Android: Settings -> Mobile networks / SIMs -> Network operators -> turn off automatic select, then choose a supported network.

The supported networks are in the plan’s install details. If you are unsure, contact support@travanzi.com with your order number and country.

Other checks

Airplane Mode must be off. Temporarily turn off other eSIMs if the phone is struggling. Restart the phone. Stay on 4G/LTE or 5G, not 3G only, if the menu allows it.

If nothing works, email support@travanzi.com or use live chat. Include device model, country, and a screenshot of the eSIM settings. Keep the eSIM on the phone.

5. iMessage not working after installing an eSIM

A new eSIM can confuse iMessage because the phone now has two lines. Most Travanzi plans are data only, so iMessage should use your Apple ID email (and your home number if you still want SMS on Primary), not the travel eSIM as a send/receive address.

 

First confirm install and data: https://travanzi.com/help-centre/ and the troubleshooting steps in article 4. iMessage needs a working data connection (Travanzi eSIM or Wi-Fi).

 

Reset iMessage

  1. Settings -> Messages.
  2. Turn iMessage off, wait 10 seconds, turn it back on.
  3. Tap Send & Receive.
  4. Keep your Apple ID email checked.
  5. Uncheck the Travanzi / Secondary line if it appears. You can keep your Primary phone number checked if you still want SMS/iMessage on that number when it is reachable.
  6. Settings -> Cellular -> Default Voice Line -> Primary (your home number), unless you are using Discover+ minutes on purpose.
 

When the trip is over: Settings -> Messages -> Send & Receive, and check your phone number again if you had unchecked it.

 

You can still use WhatsApp, FaceTime, and similar apps over Travanzi data. They do not need the eSIM as an iMessage address.

 

If iMessage still fails after a working data connection, see Apple: https://support.apple.com/en-us/118433

6. Error: Operation Code 9 / Error Code 10014 on Google Pixel

On some Pixel phones, scanning an eSIM QR code fails with: There’s an issue with your SIM profile. Operation Code 9. Error Code 10014.

 

This is a Pixel QR-reading issue, not a bad order. Do not delete anything. Install with the Manual Activation Code instead (article 2).

  1. Open the order email or My eSIMs and copy SM-DP+ Address and Activation Code.
  2. Settings -> Network & internet -> SIMs -> Add eSIM.
  3. Skip the QR camera. Choose Enter it manually.
  4. Paste the codes. Finish the prompts, then set Mobile data and Data roaming on the Travanzi eSIM.
 

If the Pixel has no Add eSIM option, it may be a carrier-locked or regional model. Check https://travanzi.com/esim-compatible-devices/ and article 8.

7. iPhone errors: Unable to activate / This code is no longer valid

After scanning the QR or entering the manual code, iPhone may show: You can try again, or contact your carrier. Or: This code is no longer valid. Contact your carrier.

  1. You must be on Wi-Fi (or another working internet connection) while the profile downloads. Install before you fly if you can.
  2. Do not scan the same QR again and again. An Airalo eSIM profile is typically used once. Repeated scans often cause Code no longer valid even when the first scan already worked.
  3. Check whether it is already installed:

            – Settings -> Cellular / Mobile Service.

            – Look under SIMs / Cellular Plans for a new line (often named Secondary, Travel, Personal, or the                destination).

            – Turn On This Line. Set Cellular Data to that line. Data Roaming ON.

      If the line is there, you are done. It will attach to a network when you reach a covered country. You do not  need to install again.

  1. If no new line appears, wait a few minutes on Wi-Fi and try Add eSIM once more. If it still fails, use the manual SM-DP+ steps in article 2, one time only.
 
  1. Still failing? The phone may be carrier-locked (article 8). Or the QR was already installed on another device – an eSIM is generally tied to the first phone that installs it. Contact support@travanzi.com with the order number. Do not delete the eSIM if it is already listed in Settings.

8. Error: Data plan cannot be added / Unsupported eSIM

iPhone may show Cellular plans from this carrier cannot be added, Data plan cannot be added, or Unsupported eSIM.

This usually means the device is carrier-locked, or that regional model has no eSIM.

 

Check carrier lock on iPhone

  1. Settings -> General -> About.
  2. Scroll to Carrier Lock (it may say Network Provider Lock).
  3. No SIM restrictions means unlocked.
  4. Any other text means you must ask your home carrier to unlock the phone. Travanzi cannot unlock it.
 

Also check: Settings -> Cellular. If there is no Add eSIM, the hardware or region does not support eSIM (common on some China / Hong Kong / US-carrier models).

Android: Settings should offer Add eSIM / Download a SIM. If it does not, the phone is not eSIM-capable or the carrier has disabled it.

 

Confirm the model on https://travanzi.com/esim-compatible-devices/

If the phone is unlocked and Add eSIM exists, try Wi-Fi, restart, and one manual install (article 2). If it still refuses, email support@travanzi.com with a screenshot of About -> Carrier Lock and your order number.

9. Calls, SMS, and Wi-Fi Calling

Most Travanzi plans are data only. They do not give you a new local phone number. Use WhatsApp, FaceTime, Skype, or similar apps over Travanzi data. Installing the eSIM does not change your WhatsApp number.

Discover+ plans include SMS and minutes when the plan card shows them. Use those only on the Travanzi line if you chose Discover+. Data-only plans cannot send carrier SMS or place carrier voice calls.

 

Keep your home number working abroad (Wi-Fi Calling)

If your home carrier supports Wi-Fi Calling, your Primary line can place calls and SMS over internet (Travanzi data or Wi-Fi) without using home-network roaming data.

  1. Settings -> Cellular -> Default Voice Line -> Primary.
  2. Open the Primary plan. Turn On This Line.
  3. Turn Wi-Fi Calling ON if the switch exists.
  4. Data Roaming OFF on Primary so the home SIM does not roam.
  5. Cellular Data = Travanzi eSIM, Data Roaming ON for Travanzi.

When it works you may see a Wi-Fi calling label in the status bar. If the Wi-Fi Calling switch is missing, your home carrier does not offer it. Travanzi cannot turn that feature on for them.